Cento1 Air Potenza Road Bike
Light, Aerodynamic Performance Furnished with the full Campagnolo Potenza drivetrain alongside a Campagnolo Khamsin wheelset, this lightweight carbon road bike is race-ready. Designed for a fast aerodynamic performance, the Cento1 Potenza Air Road Bike is stacked with technological gains to make this carbon road bike a fast and efficient racing machine. The podium is yours. Carbon 60TON To build a great monocoque carbon frame, Wilier looked for the perfect balance of stiffness, comfort and responsiveness at the lightest possible weight. Carbon fibre is an ideal material for bicycle frames because of its qualities of elasticity, capacity to withstand stresses, and its strength-to-weight ratio. The higher the modulus, the stiffer the composite. On the other end of the spectrum, the lower the modulus, the more elastic it will be. In the construction of this bike they implemented MR60H for stiffness in the critical stress areas where lateral stiffness equates to greater efficiency. Then used T800H and T700SC, with more elastic characteristics, to ensure comfort and sure-footed handling. Each was used as minimally as possible once our demanding strength and durability standards were met, ensuring the lightest weight frame possible. Asymmetric Rear Arms Thanks to the solid central BB386 EVO movement, Wilier designed generous rear seatstays and, in keeping with the long-held Wilier Triestina tradition, they are asymmetric. Concept symbol of the Cento1, the asymmetric rear stays improve pedalling efficiency against the torque generated by the chain. Integrated Cables The brake and derailleur cables flow inside the frame. This allows the frame to be aerodynamic, protect and cover the cables. Integrated Aero Fork The fork is the first part of the frame to hit wind resistance. This is where Wilier began in their revolution of the Cento1; they posed a relatively simple question, which required an incredibly sophisticated answer. How do you replicate the aerodynamic efficiency of the TwinBlade’s fork, but in a conventional fork? Using the rigidity already developed in the Cento1SR’s integrated fork shape (a 14% increase in torsional rigidity in comparison with Cento1, thanks to the repositioning of the down and horizontal tubes in relation to the headtube), Wilier created 2 small channels below the fork’s crown, in line with the TwinFork concept in the TwinBlade. These two small channels aid airflow, while enabling increased rigidity. The downtube, in its new lowered position, integrates seamlessly with the fork crown while generating another air foil which is capable of reducing wind resistance even more. The fork’s brake entry hole is hidden by the downtube, which keeps it clean and well protected. Aero Seatpost A Wilier design and Ritchey production in carbon monocoque. Wilier designed it to integrate seamlessly with the sophisticated aerodynamics of the frame. The locking mechanism is combined. Simple yet intelligent at the same time, the aero remains incredibly secure. There are two fastening systems which work together simultaneously. The first, internal part, locks the saddle to the frame. The second, a clamp, locks the saddle in place by preventing it from slipping into the saddle tube. Aero Rear Stays In developing the TwinBlade Wilier learned that if the rear oblique seatstays are kept as low as possible, the aerodynamics of the frame are improved. This is what they have done also with the Cento1AIR, moving the stays as low as possible, within UCI standards. The rear brake is entirely covered by the stays. As with many other frame parts, the vertical stays have also been designed according to the Kamm theory. A clean cut, creating a virtual “fin” from an aerodynamic point of view, but which still allows them to remain light and within UCI rules. Compared to other solutions, the rear brake installs to the frame in a standard way, with a normal socket wrench, without requiring additional parts. Integrated Plate Adjuster The cable system has been further enhanced by routing the cables inside the frame’s tubes. The Integrated Plate Adjuster is a special device which allows for the fastening and adjusting of cables. Integrated Plate Adjuster seamlessly integrates with the frame, thereby bestowing a very clean look where no elements are exposed to air resistance. Easily interchangeable to be compatible with different electronic group sets, the Integrated Plate Adjuster allows one to route cables inside the tubes and to redirect them towards the bottom bracket. Combined with the special cable guide plate located under the bottom bracket, Integrated Plate Adjuster keeps cables neatly spaced from the downtube’s inside surface. Noise and shifting efficiency loss can occur when a cable does not maintain its position. 3D Dropout The dropout evolves and implements its name. The 3D Dropout is born. It is not a mere rear derailleur mounting plate anymore. The dropout now extends over a third dimension and serves also as a cable stop. This newly acquired third dimension leads to an especially stiff dropout compared to conventional fastening plates. Thanks to its generous size, Wilier created two holes (a larger one for the mechanic group set cable and a smaller one for the electronic cable) to route cable housing or cables without compromising the stiffness of the dropout. In this manner, the dropout may be used both for mechanical and electronic group sets. For the mechanical group set, it allows one to use a shorter cable housing sleeve and to have the shifter cable follow its natural curve since the rear derailleur cable is located closer to the fastening point. This improves shifting efficiency and smoothness. The exit routing is not the only improvement. The cable stop has been positioned above the drive-side chainstay, thereby keeping the cable flawlessly suspended within the stay. The internal cable routing through the down tube is kept at a distance from the frame’s inner surface to assure that there is no friction during shifting. The wiring exit point of the electronic group set has also been optimised as it is setback and above the drive-side dropout. This feature facilitates and expedites rear wheel removal and installation. Built, Tested and Tuned Each bike is fully built, tested and tuned by Wiggle’s team of qualified bike mechanics to ensure your bike arrives in perfect condition. To find out which size fits you click on the size guide tab above. Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page. Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.
Product code: 25201887266555
Founded in 1906 by Pietro Dal Molin in Bassano del Grappa, iconic bike brand Wilier Triestina’s name is an acronym of the phrase: W I’Italia liberate e redenta. Long live Italy, liberated and redeemed. The company added ‘Triestina’ in order to support the call for the city of Trieste to be returned to Italy from the Austro-Hungarian empire. As you might expect from a company so entwined with il bel paese, Wilier’s bikes are unmistakenly Italian: beautifully crafted, brimming with passion and unapologetically fast.